When starting topstitching or edgestitching at a hem line or anywhere there is a thick, narrow edge, it is very helpful to use a “hump jumper” under the back of the presser foot to level the foot for a smooth start to your stitching. Below are two spools of an ivory thread. Autolock again or leave a long tail (3-4″) you can pull through to the back and knot. When starting topstitching or edgestitching at a hem line or anywhere there is a thick, narrow edge, it is very helpful to use a “hump jumper” under the back of the presser foot to level the foot for a smooth start to your stitching. The needle was moved to the left position so the Blind Hem foot could guide the line of stitching along the edge of the ribbon. Depending on your machine, there may be other stitches from which to choose for topstitching. The photo above features a couple of our important furry friends who like to help out in the studio, especially when the testing of soft blankets and pillows is needed. At the break or stopping point, use an Autolock stitch or pull the threads through to the back and knot. CLICK HERE to find out more… Quilt Binder Set for 9 mm … You could even use a folded up square of fabric as a leveler, however, the solid surface of a hump jumper creates better traction. For a complete understanding of understitching, check out our full tutorial. This means if you have a fabric with a particularly coarse weave, such as a canvas or linen, the stitches may appear to jog ever so slightly from the dead-center alignment. If your machine has an Autolock feature, as many of our Janome studio machines do, simply touch this button at the beginning and end of the seam to create a small, neat knot. In the sample below, we turned up a 2″ hem then added ribbon trim to the right side. Use a needle to pull the top thread tail though to the back and tie the tails together in a double knot. Simply align the needle 1/8 inch away from the seam ditch. If your thread breaks or you need to connect two lines of topstitching or edgestitching, you can use a lock stitch (machine or hand) to make a smooth connection. The foot can be used in many different ways some of which include: measured seams, top-stitching, hems or even adding decorative trims to projects. Janome machines often include a hump jumper as a standard accessory. A cousin of topstitching is edgestitching, which is defined as a row of stitching on the very edge of a garment, normally ⅛” or less from the edge. They can also be purchased separately. Let us know how it goes. First foot is called Edge Guide foot (from Janome). It comes with two removable guides: the Quarter Inch Guide and the Ditch Stitch Guide, and it has lots of great measurement markings (in bright red) to help you perfectly line up a seam. Project shown above: Crossbody Bucket Carryall. We will never sell, rent or trade your personal information to third parties. Remember, the edge tself must be straight. We like to use the Quarter Inch Seam foot for topstitching along an exposed zipper. Foot of the month series: Janome’s Edge Guide Foot, Saturday Sewing Holiday Projects #4: Reusable Christmas Cracker, Janome HQ’s Instagram LIVE TODAY, WEDNESDAY 1pm EST. The guide on this foot aligns edges/seams of fabric so that neatly parallel edge stitching and top-stitching can be achieved with ease. In the photo below it’s easy to see the difference in style between the top and bottom samples. A sub-set of edgestitching is understitching, which is a line of edgestitching that secures a seam allowance to a facing or lining. Tips and tutorials on how to use them and what accessories will work with them. The handy Ditch Quilting foot is also one that is often part of a standard foot compliment. Be the first to see new projects and patterns, helpful techniques, and new resources to enhance your sewing experience. If you’ve been struggling to sew in a neat, straight line, particularly at a higher speed, Janome has several presser feet available to help you out. Want your topstitching or edgestitching to stand out as an embellishment accent? By edgestitching along the ribbon through all the layers, we attached the ribbon and secured the hem at the same time, using the Blind Hem foot. Using a presser foot with a guide can make your job easier and your results lovelier. The top sample shows a 2.2mm stitch and a 3mm stitch in all-purpose thread. *Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business. As with all our techniques here at Sew4Home, we’re going to emphasize the need for patience and practice to become a topstitching and edgestitching pro. We are closely monitoring the current Covid 19 (Coronavirus) outbreak in the UK and adhering to all measures, in line with government & NHS recommendations. They can also be purchased separately. Knot all three threads (two top threads and the bobbin thread) to secure. Place a front panel, layered with a square of tearaway stabilizer, under the presser foot. Now that we’ve tantalized you with all these great specialty feet, we need to at least mention that you can simply use your standard presser foot. Project Shown above: Multi-Pocket Canvas Tote. The two best options to lock your topstitching or edgestitching at the beginning and end are an Autolock stitch or a hand-knot. NOTE: If you are new to sewing, we have an introductory article on setting stitch length. In addition, be sure to adjust the stitch length and the thread weight as you practice. It will create the cleanest continuous line. When your seam is complete, you can use your fingernail or the sharp, flat side of a pair of tweezers to gently push individual stitches back into line. Welcome back to my Summer Series on Sewing Machine Feet.So far, I’ve shared about the All Purpose Foot here and the Clear Sole Foot here.. Today, I want to talk about my favorite sewing machine foot, the Edge Stitch Foot #10. This is our standard choice here at Sew4Home. In addition to the thread you choose, the final look of your topstitching or edgestitching will depend on the stitch your select. Enter your email address below to subscribe to the Sew4Home newsletter. A twin needle can give you double emphasis with two perfectly spaced lines of stitching. Test-test-test until you are sure your stitching will be spot-on for your final project. Sew Edge stitching With your regular foot; Edge stitching is easy with the regular straight stitch or all purpose machine foot, as well. Although the Autolock is easier and faster, it does leave a bit of bulk because it’s creating a knot. The term topstitching has traditionally defined the line of stitching that attaches one element to another, such as a pocket to a shirt. We are closely monitoring the current Covid 19 (Coronavirus) outbreak in the UK and adhering to all measures, in line with government & NHS recommendations. The Edge Guide foot is a Janome foot we totally love. We have one additional note about stitch formation in regards to fabrics with coarse weaves: topstitching and edgestitching seams want to follow the weave of your fabric. The photo below of a little girl’s linen party dress shows the understitching that is holding the facing in place as well as the edgestitching detail along the collar and armholes. Here at Janome UK we are prioritising the health and wellbeing of all our employees and retailers. Just go slowly and carefully, using the edge of the foot itself or a needle plate marking as your guideline. Here at Janome UK we are prioritising the health and wellbeing of all our employees and retailers. When commenting, your name will display but your email will not. If you also work on a Janome machine, check the Quilting section of your decorative stitches selection for this option. Hi Robin – Sounds like a good test. It depends more on the results you are going for. With a single line of topstitching or edgestitching, stop at the corner with your needle the the down position, and pivot. There’s no hard and fast rule regarding the needle or thread you must use for topstitching and edgestitching. Using the red markings that are at 1mm increments on this foot will allow you to fine-tune the guide to the perfect position while staying effortlessly straight as you sew. The Autolock example shows the auto-cut function that trims the thread tails. Trim the tails close to the knot. Janome machines often include a hump jumper as a standard accessory. The samples below show you the end of a topstitching seam with Autolock (top) and hand-knot (bottom) from both the front and the back. It provides a crisp edge for facings, collars, pockets or any situation where you want a tight, professional finish along a seamed edge. The sample below shows an Autolock fix in the middle of a seam with a constrasting thread. It has a perfectly balanced outboard guide you can smoothly slide to the right then lock into place, from ⅜” to 1⅛” from the center needle drop (10mm – 30mm). If you’ve been struggling to sew in a neat, straight line, particularly at a higher speed, Janome has several presser feet available to help you out. This is definitely a picky piece of advice, but might stop you from thinking you’re crazy when you can’t get your stitches to cooperate and line up as straight and true as the repetitve marks of a drawn dashed line.