In rabbits, about 40% of the inhaled sulfur dioxide is absorbed in the nose and pharynx when concentrations of about 290 ug/cu m (0.1 ppm) are inhaled. Thermodynamic properties of substances The solubility of the substances Periodic table of elements. The model is in this report applied on the absorption of a flue gas into a NaOH scrubber solution. here includes sodium hydroxide and sodium salts that makes it possible to study simultaneous absorption of flue gas components in alkaline scrubber solutions. The unbalanced chemical equation for this reaction is given below: SO 2 ( g ) + NaOH ( s ) → Na 2 SO 3 ( s ) + H 2 O ( l ) Assuming you react 38.3 g sulfur dioxide with 32.8 g sodium hydroxide and assuming that the reaction goes to completion, calculate the mass of each product formed. For example, + + Reaction with metals and oxides. Simultaneous Sulfur Dioxide Absorption and Hydrogen Sulfide Generation in an Aqueous Solution of Sodium Sulfide. 26. Environmental Science & Technology 1996 , 30 (2) , 377-384. The process defined in claim 24 wherein said alkaline solution is an aqueous solution of sodium hydroxide. Sodium hydroxide also reacts with acidic oxides, such as sulfur dioxide. Absorption after inhalation has been studied in rabbits and man. 27. 25. SO 2 + 2NaOH → Na 2 SO 3 + H 2 O [ Check the balance ] Sulfur dioxide react with sodium hydroxide to produce sodium sulfite and water. Such reactions are often used to "scrub" harmful acidic gases (like SO 2 and H 2 S) produced in the burning of coal and thus prevent their release into the atmosphere. Sulfur dioxide is highly soluble in aqueous media. A process for removing sulfur dioxide from a gaseous mixture comprising: At higher concentrations (29-290 mg/cu m, 10-100 ppm), the fraction absorbed is much higher (about 95%). Sulfur dioxide gas reacts with sodium hydroxide to form sodium sulfite and water. Sulfur dioxide (SO2) and sodium hydroxide (NaOH) react to form sodium sulfite (Na2SO3) and water (H2O) by the following reaction. Sodium hydroxide - concentrated solution. The influences of different operating conditions on the SO 2 removal efficiency, such as sodium hydroxide concentration, liquid-to-gas ratio, gas velocity and SO 2 concentration, were examined. Sulfur dioxide react with sodium hydroxide. The absorption of sulfur dioxide into highly concentrated sodium hydroxide in a spray column from simulated flue gas was investigated. The process defined in claim 24 wherein said alkaline solution is an aqueous solution of ammonium hydroxide. Find another reaction. Our channel.